Services & Logistics

” Flexibility is our philosophy “

• Cutting

• Milling

• Taping

• Drilling

• Grooving

• Testing

• Packaging


Cutting

Process carried out by means of a blade, which guarantees a very precise cut. The cut allows to divide the Master panel into submultiples.


Milling 

Working with tools and cutters mounted on machine tools such as milling machines or drills. Unlike other more simpler processes, milling requires rotating the tool and moving the piece: the rotating cutting edges of the cutter remove the wood from the piece when it interfgers with the cutter.


Taping

Processing carried out by folding the panel in half with application of tape on the back. The two parts of the panel are then superimposed on each other, the panel is “closed like a book”, boxed and shipped. This operation facilitates the handling of the product without altering its uniformity and structural characteristics.


Drilling

It consists in making a hole inside the panel. The drilling of the panels is carried out on computerized numerical control machinery, with almost absolute precision.


Grooving

It consists in making incisions on panels through the use of a blade.


Testing 

Further final check to complete all inspections already carried out during production and to ensure the quality of the end product.


Packaging 

The processing consists to coupling the panels of similar sizes and weights in order to optimize the shipping of the product, whereby protective measures are applied at the corners, fixed with a firm strapping.


____________________________________________________________________________________________________________


Recommended packaging

Our shipped and produced products are securely packaged using precise, standardized processes.

• Choose a resistant and level surface for positioning on the ground

• Make sure that the rafters have uniform thickness and length corresponding to the width of the panels.

• The upper parts of the decorations must always be positioned towards each other and protected with covering panels.

• Avoid protruding fleece panels of uniform size

• Always prefer horizontal storage; in case of vertical storage, use a few panels with very secure fixings.


Cleaning and maintenance

• Avoid exposure to humidity during transport and use adequate fixing tools to avoid falling of the material, also using non-slip mats.

• Always lift the panels and avoid rubbing the decorations to ensure their integrity.

• Store and treat panels in warehouses with constant climatic conditions

• Avoid the proximity of the panels to heat source direct sunlight, strong variations in humidity and non-homogeneous climatic conditions.


Disposal and Environment

• All our wood materials are managed responsibly to prevent possible damage to people and / or things and to minimize the impact on the environment.

• Manufacturing waste is managed in an optimal way, favoring recycling through specialized companies for the manufacture of new panels.

• Respecting the environment, we use panels with recycled wood and sawmill wood waste; we use suppliers located near the operating structures to reduce the emission of gas from the transport and we use rail or sea instead of road transport.

• We prefer to process wood from certified forests. We oversee all wood purchases and the most common forest certifications through a strict control procedure.